Wheels & tyres
20" Staggered ZL28 Camaro Wheels & Tyres suits VE & VF Commodore
|Auckland||Auckland Region||$45.00||+ $20.00|
|Whangarei / Hamilton||Up to Whangarei / Down to Hamilton||$70.00||+ $30.00|
|North Island||Rest of North Island||$90.00||+ $30.00|
|Christchurch||Christchurch Region||$140.00||+ $30.00|
|South Island||Rest of South Island||$280.00||+ $30.00|
20" STAGGERED CAMARO Z28 WHEELS
Multi Concave Spoke design goes all the way out to the edge of the wheel so look Huge. Much wider Concave Rear Wheel creates a much more aggressive stance than factory VE/VF Commodore wheels when car is viewed on any side angle.
Big Brake Clearance including all 6 Pot Brembo and 6 Pot HSV AP's!
5 x 120 Stud Pattern
VE and VF Commodore Fitment (2006-2017) below;
20 x 9" Front with 27p Offset
20 x 10" Rear with 35p Offset
Wide Fit and Ultimate Stance. Genuine GM spec 66.9mm Centre Bores match perfectly to VE and VF so bolt straight on with factory wheel nuts with no need for aftermarket hubrings. Combine with Tyres 245/35/20 Front and 275/30/20 Rear.
Note : VF (GEN F & GEN F2) HSV factory uses different sized Tyres - 255/35/20 Front and 275/35/20 Rear. Due to the aggressive offset of these Z28 Wheels for Gen F HSV incl LSA Supercharged Cars especially with Lowered Suspension we recommend to use 285/30/20 Rear which we stock in Nitto Invo and Nangkang NS20. Note : Speedo will need recalibration to suit which we can arrange.
Note : Lowered cars will require Rear Guard Roll and trimming back of tab where bumper joins body due to Rear Wheel aggressive Offset. Stage 2 Lowered Suspension may still just rub on Rear Tyre under full load/shock compression.
Gen 5 Camaro Fitment (2009-2015) below ; (ALSO USED ON XAIR VE/VF WIDEBODY CARS)
20 x 10" Front with 23p Offset
20 x 11" Rear with 43p Offset
Factory Fit and Ultimate Stance. Genuine GM spec 66.9mm Centre Bores match perfectly to Gen F Camaro so bolt straight on with factory wheel nuts with no need for aftermarket hubrings. Combine with Tyres 285/35/20 Front and 305/30/20 Rear.
The finishes available ex stock are;
Custom finishes available to order 2 weeks delivery are;